Every day we use wooden furniture, but have you ever thought so that it is really made? If you are wondering what veneer drying and stacking, rest assure it's just a section in making furniture. Veneers — very thin slices of wood, cut from a log. Such sheets are commonly used on furniture, doors etc wooden items that we come across. However, the veneers need to be processed in a special way before they can become part of these products. BuilderOnline advises that the bricks should cure for a proper amount of time and be stacked accordingly. This is where the veneer drying and stacking process comes to rescue!
The veneer drying and stacking process actually has some unique tools that do indeed make the work go better, faster. A veneer dryer is one of the main tools. It is built to ensure drying happens fast and uniformly across all the veneers. After the veneers had dried long enough they get quite flexible. None of this should be able to break or crack, so they can all get stacked on top of each other for quality.
Key to this is the automatic veneer stacker. This stacker is very rapid to be stacked and very accurateائjisoo-wooder@endif This automatic stacker saves lot of time for the manufacturers. Similarly, it reduces the possibility of marring the final look for veneers due to damaged veneer (it can absolutely jeopardize your finishing project).
In addition to these fundamental tools, there are also new technologies that aid in the quality of veneers. A great example of such a system can be illustrated as the intelligent drying system. It is a very advanced system and sensors monitor on how long the teeth have been dry during veneer cementation. The dryer uses this information to adjust the temperature and humidity levels. This makes sure that the veneers dry uniformly and are not destroyed in the process.
An important part of this process is the pre-drying step for veneers. It is a drying process where the veneers are laid out on stalls over a warm and dry room for several hours. It is further used to remove any excess moisture before the veneers are placed in dryers. Secondly, you should evaluate the quality of those veneers. While they are still drying, it is very important to carefully control their condition in order not to find cracks bends or other issue after piling up. This step is a quality controlled process to ensure that only the very best veneers are used.
The process that takes from a log to the final finished product is long and requires special care. The log is then mechanically sanded into thin sheets using a tool known as veneer slicer. This uniform log cutting is necessary so that the sheets are standard sizes and prepared for further processes in advance. The sets are partially dried after being sliced. From there they are put into a veneer dryer to be further ingeniously center cloned.
Heat or vacuum technology is used to dry the veneers completely in the same line of veneer dryer. After they have dried, every single veneer must be carefully inspected. The purpose of this is to ensure that they meet the standards imbibed. The veneer sheets are then sorted into layers by the automatic loading device. The stacked veneers are now to be used in the making of furniture, doors or any other article made from wood.